* You are viewing Posts Tagged ‘offsite construction’

Modular Construction to be considered for new Cornell Campus on Roosevelt Island

 

 

 

 

 

 

Cornell out to push construction frontiers

3:46 pm, May 24, 2012

BY SARAH TREFETHEN

 

Cornell hopes to deliver four new campus buildings by 2017, if funding and costs work out as hoped.

When the Bloomberg administration set out to bring a new applied sciences campus to the five boroughs, the goal was to introduce a source of innovation that would help New York City’s economy remain competitive in the 21st century.

Now, as Cornell University moves forward with plans to construct a $2 billion engineering campus on Roosevelt Island, innovation remains the project’s watchword.

That trailblazing philosophy will extend to awarding construction and design contracts for the planned two million s/f on new space, according to Kyu Whang, the university’s vice president for facilities service.

Modular, pre-fabricated construction is “absolutely” an option for the project, Whang told attendees of NAIOP’s “Building the Future of New York City” forum earlier this month.

“If it’s an innovative way to do construction, then certainly we’ll consider it on our campus,” he said, responding to a direct question about the controversial practice of staging some construction work for a project in an off-site factory.

Modular building is still uncommon in New York, but Forest City Ratner plans to start construction on the world’s tallest pre-fabricated steel building in Brooklyn this year.

Whang’s comment was in keeping with one of the themes that emerged during the morning-long event, held overlooking the World Trade Center construction site: the idea that New York City builders are out of date.

Seth Pinsky, chairman of the Economic Development Corporation, said that the city’s building methodologies were “decades behind” other cities in the world.

Even by national standards, New York construction may be too slow and costly to attract some industries, said Pat Di Filippo, executive vice-president of Turner Construction.

Di Filippo described the pressures of time and efficiency faced by a major technology company like Apple or IBM (a Turner client) when launching a new product.

“Construction, facilities — those are just a drag on the bottom line,” he said.

Fast, efficient building is one of the things Cornell will be looking to accomplish on Roosevelt Island.

The Ithaca-based ivy school is contractually obligated to deliver two buildings by 2017, but it has a more ambitious goal. If funding and costs work out as hoped, Whang said, Cornell hopes to complete four buildings by that deadline.

Cornell is looking for a developer to enter into a partnership to construct its second Roosevelt Island building, a research and development facility. That developer will need to be comfortable with Building Information Management (BIM) software, Whang said.

Construction professionals are not the only people Cornell wants to push into new frontiers. Architect Thom Mayne of Morphosis is designing the first piece of the campus, a 150,000 s/f, net-zero energy academic building.

Mayne, who was behind the Cooper Union academic building at 41 Cooper Square, is expected to deliver the first design drafts in November 2012.

The university expects the design to break from the academic tradition of long corridors of offices and classrooms, and instead create a building of open, collaborative space with very few private offices, Whang said.

While resistance from tenured faculty can prevent universities from experimenting with floor plans, Whang said, there is an advantage to launching a completely new academic program on a completely new campus.

“We’re building the building before we have the faculty,” he said.

 

‘Real Estate Weekly’; “Cornell out to push construction frontiers”; Sarah Trefethen; May 24, 2012;

http://www.rew-online.com/2012/05/24/7243/;

Greenflex Residence Hall System

  

 

 

 

 

 

 

 

 

 

 

 

 

Cars are built in a controlled environment and are customized to meet the end-user’s needs and requirements.  At Capsys, with our Greenflex residence hall system we apply the same concepts!

We start with the basics; what are the student housing requirements, what does the school need and when do they need it?

 We go to the next step; what is the culture and what are the features we need to incorporate into the Greenflex system?

 We finalize a plan; let’s combine the requirements, the schedule, the culture, the features and of course the budget. 

 A plan is born;  All this done and the Greenflex design becomes unique but budget and schedule conscience!

 We get it done!  That’s the end result, the Greenflex system from Capsys gets the job done!  No need to worry about where the students are going and what the cost is, let’s do it together with this innovative Greenflex system!  It’s built to your needs, based upon your budget and on your schedule!

Cautious Planning in Sustainable Design

Sustainable and environmentally friendly materials and methods are permeating the industry rapidly.  Capsys has fully embraced these concepts from our beginning; but with any new technology and ideas endurance is determined by performance.  At Capsys we strive to embrace the methods that will stand the test of time, always cautious of what is a fad and what is tried-and-true.  Some examples of our dedication:

Right-size the equipment – The Capsys engineering team always verifies that we are installing the appropriate mechanical equipment.  Oversizing equipment leads to not only additional costs upfront but also short-cycling and reduced efficiency.  Getting the correct size equipment means higher efficiency and lower overall costs and consumption, its proven and we embrace it!

Seal the gaps – Such a tremendous source of heating and cooling costs come from air infiltration, if a building is properly sealed and the design accounts for occupant health then we have a healthy building, person and energy budget.  We make sure to account for not only the cost of conditioning but also the health and comfort of the people living inside the building.

Indoor air quality – The environment inside the building is paramount to the health and productivity of the occupants, we don’t take all the buzzwords and just follow them, we actually make sure the job is done right.

Education – Talking about sustainable design doesn’t do anything, acting on it does!  Capsys ensures that each of our team, from project management to installing professionals understands WHY we are doing something, when people understand the reason for a measure they take extra care in providing and ensuring its effectiveness.  Always keep everyone from the designers to the end-users informed, it does make a difference!

The Mothership Has Landed

It’s a great day here at Capsys and even better if you need to use a rest room in Greenpoint.

We just delivered and set our 600 sf prefabricated comfort station to the Greenpoint Playground in Brooklyn, NY.

Check out some pictures from today’s setting!

Let us know what YOU think.  Does the city need more public restrooms?

Modular Construction “Down Under”

It’s always a treat for us to read about how another country has adopted modular construction to tackle their own unique construction requirements. The following article is from the Australian web site “Construction Source” and was authored by John Rouvalis who is an Associate Director with the international Engineering company the Meinhardt Group. In it, John urges his peers to discover and to fully appreciate all of the attributes that modular construction can bring to a project.

http://designbuildsource.com.au/exploiting-modular-construction

Setting of Nehemiah Spring Creek Phase III

 The third phase of a multi-phase affordable housing project in the East New York section of Brooklyn.

 

 

Please join Capsys and members of the NYC Development Community on April 26, 2012 for a discussion on the future growth of the Modular Construction Industry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NYU Schack Institute of Real Estate Construction Management Program and the Real Estate Synergy Club will be hosting an event entitled “OFF-SITE CONSTRUCTION & MODULAR HIGH-RISE” to be held at The Shorin Performance Center @ The Kimmel Center on the NYU campus at 600 Washington Square South, NY, NY on Thursday, April 26, 2012 at 7:30 AM.

The event will include breakfast followed by a panel discussion featuring prominent members of the New York development and construction oversight authorities, representatives of the Modular Building Institute, members of the Sustainable construction consultancy community as well as members of the Capsys management team.

As Sasha Durcan, one of the event’s organizers puts it:  “The global construction and development industries have embraced “one of the oldest new ideas” with Off-site & Modular High-Rise Construction.  Advances in parametric modeling and digital fabrication have significantly advanced off-site building capabilities.    Modular design can now substantially reduce schedules; create efficient labor, material and cost savings; improve quality control and worker safety; as well as easily contributing to sustainability goals.”

So, please join the Capsys, along with the NYU Schack Institute CMAA Chapter, the Real Estate Synergy Club, members of NYU Stern, NYU Law and NYU Wagner schools, as well as industry stakeholders, to discuss current challenges and solutions in the Off-Site & Modular Industry. 

This event is free to the public.

For more information as the event evolves, please check in often at the event BlogSpot linked below.  We look forward to seeing you there.

http://nyumodular.blogspot.com/

 

Is Offsite or Modular Construction by its very nature a Sustainable Methodology for Construction?

The answer is yes according to Alistair Gibb, Professor of Construction Engineering Management at  Loughborough University.   Loughborough University is located in Leicestershire, England.   It is a leading research school consistently ranked among the top 15 in the UK.

 Professor Gibb supplied the following article to the website Buildoffsite, which is one of our favorite web spots.  Buildoffsite is the trade organization representing the Offsite Construction Industry throughout the UK.

 We at Capsys are often asked about the Sustainable Construction aspects of our fabrication system.  I think the following article by Professor Gibb very clearly and succinctly points out the most important and relevant  aspects of the discussion and comes down clearly on the site that volumetric modular construction will have numerous positive impacts on any typical construction program.

 Please read what professor Gibb has to say in the following:

 

Is offsite sustainable?

 Offsite manufacture, sometimes called prefabrication, modular or industrialised building, is an approach to constructing the built environment that has been at the leading edge of innovation for a number of years. Put simply, offsite is manufacturing and assembling whole buildings or substantial parts of buildings prior to installation into their final location. The work almost always takes place in a factory environment. The offsite spectrum includes non-volumetric units such as panels and building services modules; volumetric units such as toilet or kitchen ‘pods’; and whole building solutions, often known as ‘modular buildings’. Offsite is a strategy that affects the whole project rather than just the application of ad-hoc products or technologies. Government-prompted reports have extolled its virtues, manufacturers have publicised its benefits, developers have worried about its cost and architects have debated its worth. Notwithstanding, offsite is here to stay as a valuable part of the built environment.

 But, is offsite sustainable? The vision of many of the early exponents fits the sustainable culture very well: Buckminster Fuller’s goal in the middle of the last century was to ‘touch the earth lightly’ and his Dymaxion Dwelling Machine – or Wichita House1 was his realization of this ambition. However, like many such experiments, the Wichita house was ultimately destined to become a museum exhibit. Kieran Timberlake’s Loblolly House2 sees the minimum impact of the construction process through offsite as part of its sustainable credentials, along with the widespread use of recycled and local materials, such as locally quarried stones and sustainably harvested wood windows.

 1 www.designmuseum.org/design/r-buckminster-fuller

2 www.treehugger.com

3 WAS 003.003 – Offsite Construction Case Studies

Photo Gallery of Bldg 92

Here are some photos of Bldg 92 proudly built by Capsys.



Are LEED Construction projects inherently more dangerous for construction workers?

A report recently published by researchers from the University of Colorado has generated considerable buzz within the high performance construction industry.  According to Matthew Hallowell, assistant professor of Civil, Environmental and Architectural Engineering at the University of Colorado Boulder, he and his fellow researchers found that LEED construction locations had a 50 percent higher injury rate than non-LEED sites. Hallowell and his team visited and made observations at various LEED and non-LEED construction sites, pored over injury reports, and conducted interviews in their process of completing their study.

The report is interesting and provocative.  I would like to highlight a key finding from the report, the summary of key findings from which follows.  Prefabrication of buildings such as the modular construction techniques we use here at Capsys may greatly or mitigate many of these increased risks.

We thank the author for his work and suggest that you readers seek out the entire report and form your own conclusions

 

Key Findings from Research:

Design for Safety Techniques for Green Building Components

Reports and Authors:

Collective results of this study have been organized into three manuscripts, which have been

accepted or are in review by the Journal of Construction Engineering and Management:

Safety Risk Identification for High Performance Sustainable Building Construction

Bernard R. Fortunato III, Matthew R. Hallowell, Michael Behm, Katherine Dewlaney

Safety Risk Quantification for High Performance Sustainable Building Construction

Katherine S. Dewlaney, Matthew R. Hallowell, and Bernard R. Fortunato III

Safety Risk Mitigation for High Performance Sustainable Building Construction

Katherine S. Dewlaney and Matthew R. Hallowell

Overview:

The US Green Building Council’s Leadership in Energy and Environmental Design

(LEED) program represents the largest program in the United States for the measurement,

verification, and certification of green buildings. A recent study found that LEED certified

buildings have a recordable injury rate that is 9% higher than traditional, non-LEED

buildings. This finding served as the impetus for the present study, which aimed to (1)

identify and evaluate the safety and health risks associated with the design elements and

construction management practices implemented to achieve LEED certification by

conducting eight detailed case studies; (2) quantify the percent increase in base-level

safety risk through 37 interviews with designers and contractors who had completed an

average of four LEED projects and 100 traditional projects in their average of 18 years of

experience in the architecture, engineering, and construction industry; and (3) identify and

describe strategies that reduce the safety risk associated with the design and construction

of high performance sustainable projects by conducting 26 additional interviews with

experienced designers and constructors. The study revealed 12 LEED credits that

increase safety risks on construction projects when compared with traditional, non-LEED

alternatives. The study also revealed that there are feasible prevention through design

techniques, technologies and controls, and management strategies that can be

implemented to mitigate these risks. The results of the study were packaged into a first-generation decision support tool that provides designers and construction managers with

safety suggestions for their LEED projects.

 Workers on LEED construction projects are exposed to work at height, with

electrical current, near unstable soils, and near heavy equipment for a greater

period of time than on traditional projects.

 Workers are exposed to new high risk tasks such as constructing atria, installing

vegetated roofs, and installing photovoltaic (PV) panels that are not present on

traditional projects.

 The most significant impacts are a 36% increase in lacerations, strains and

sprains from recycling construction materials; a 24% increase in falls to lower

level during roof work because of the installation of on-site renewable energy

(e.g., PV panels); a 19% increase in eye strain when installing reflective roof

membranes; and a 14% increase in exposure to harmful substances when

installing innovative wastewater technologies.

 Designers and contractors identified prefabrication, effective site layout, and alternative products as methods to prevent injuries that specifically relate the hazards of each sustainable element.

 Specifying low VOC materials reduces health-related risks for construction workers

who perform work in enclosed environments.

Conclusions:

 This research has revealed the substantial need for a detailed lifecycle analysis of

the safety impacts of high risk and common sustainable building technologies.

Although these technologies may have substantial environmental benefits, many

have been shown to result in greater exposures to known occupational hazards

during the construction process. Further research is needed to evaluate the safety

risks during manufacturing of sustainable materials, shipping, installation, and

maintenance.

 

For more information, contact the lead author:

Matthew.hallowell@colorado.edu

© Copyright 2011, CPWR – The Center for Construction Research and Training. All rights reserved This research

and report was funded by CPWR – The Center for Construction Research and Training as part of a cooperative

agreement with the National Institute for Occupational Safety and Health, NIOSH (OH009762). The research is

solely the responsibility of the authors and does not necessarily represent the official views of NIOSH. CPWR, the

research and training arm of the Building and Construction Trades Department, AFL-CIO, is uniquely situated to

serve workers, contractors, and the scientific community. For more information, visit www.cpwr.com